Fastener Specifications
Single Use Non-Threaded Fasteners/Components
| Application |
|---|
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal.
|
| Steering Gear Boot Inner Clamp |
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal.
|
|
| Electronic Power Steering Motor Control Module Bracket Bolt | 18 N.m (13 lb ft) |
| Electronic Power Steering Motor Control Module Mounting Bolt | 3 N.m (27 lb in) |
| Steering Gear Bolt | |
|
100 N.m (74 lb ft) |
|
90 - 105 Degrees |
| Steering Linkage Inner Tie Rod | 88 N.m (65 lb ft) |
| Steering Linkage Inner Tie Rod Jam Nut | 75 N.m (55 lb ft) |
| Steering Linkage Outer Tie Rod Nut | |
|
30 N.m (22 lb ft) |
|
120 - 130 Degrees |