Keyless Entry Control Module Bracket Replacement

Fig 1: Keyless Entry Control Module Bracket

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the quarter lower rear trim panel - left side. Refer to Quarter Lower Rear Trim Panel Replacement (Left Side, Standard Wheelbase)Quarter Lower Rear Trim Panel Replacement (Left Side, Extended Wheelbase) .
1	Keyless Entry Control Module Bracket Fasteners (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Keyless Entry Control Module Bracket Procedure Disconnect the electrical connections. Transfer components as necessary.

Callout

Component Name

Keyless Entry Control Module Bracket Fasteners (Qty: 2)

CAUTION:

Tighten
9 N.m (80 lb in)

Keyless Entry Control Module Bracket

Procedure