LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis (Single Page) >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Sensor Relearn >> Using Keyless Entry System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Keyless Entry System

  1. Turn ignition switch to ACCY position. Apply parking brake.
  2. Simultaneously press the keyless entry transmitter's lock and unlock buttons until a double horn chirp sounds, indicating the learn mode has been enabled.
    NOTE: The left front turn signal will also illuminate to indicate the learn mode has been enabled.
  3. Activate the sensors by one of the following methods:

    Increase/Decrease Method:  Starting with left front tire, increase or decrease the pressure for 8-10 seconds, then wait for a horn chirp sounds. The horn chirp may occur before the 8-10 second pressure increase/decrease time period has been reached, or up to 30 seconds after the 8-10 second pressure increase/decrease time period has been reached.

    Sensor Activation Tool Method:  Starting with the left front tire, hold the scan tool against the tire wall aiming upward with the antenna. Press the activate button and wait for a horn chirp. After the horn has chirped, the turn signal will illuminate indicating the next location to be learned.

  4. After horn chirp has sounded and the right turn signal has illuminated, repeat procedure for the next 3 sensors in the following order: right front, right rear, left rear.
  5. After left rear sensor has been learned, a double horn chirp will sound, indicating all 4 sensor IDs have been learned. Turn ignition switch to OFF position. Adjust all tire pressures to specification.
scientia non olet · About LEMON Manuals