LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System And Pedestrian Protection System >> Diagnostic Information and Procedures >> DTC B094B or B094C: Object Detection Control Module >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition ON.
  2. Verify that B094B 45 or B094C 45 is not set.
    • If DTC is set 
    1. Program the appropriate B94 Side Object Sensor.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the appropriate B94 Side Object Sensor.
      • If the DTC does not set
    3. All OK.
    • If DTC is not set 
  3. Verify that B094B 00, B094C 00, B094B 08, B094C 08, B094B 54 or B094C 54 is not set.
    • If DTC is set 

      Replace the appropriate B94 Side Object Sensor.

    • If the DTC is not set 
  4. Verify that B094B 58 or B094C 58 is not set.
    • If DTC is set 

      Verify the area in front of the sensor is clean, unobstructed, and damage-free.

    • If not clean, unobstructed, and damage-free, clean or repair as necessary.
    • If clean, unobstructed, and damage-free, replace the appropriate B94 Side Object Sensor.
    • If DTC is not set 
  5. All OK.