Circuit/System Verification
- Ignition ON.
- Verify that DTC B101E 42 is not set.
- If DTC is set
Perform the Front View Camera Module Programming and Setup procedure.
- If the DTC is not set
- If DTC is set
- Verify that DTC B1008 is not set.
- If DTC is set
- Calibrate the front camera module. Refer to Front View Camera Module Learn .
- Verify the DTC does not set.
- If the DTC sets, replace the frontview camera module.
- If the DTC does not set
- All OK.
- If the DTC is not set
- All OK.
NOTE:
Do not diagnose this DTC if set in history