Radio Replacement

Fig 1: Radio

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the hazard warning switch. Refer to Hazard Warning Switch Replacement .
1	Radio Fasteners (Qty: 2) CAUTION: Refer to Component Fastener Tightening Caution .
2	Radio Assembly Procedure Disconnect the electrical connector. Disconnect the antenna cable. Reprogram the radio after replacement. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure
Remove the hazard warning switch. Refer to Hazard Warning Switch Replacement .

Radio Fasteners (Qty: 2)

CAUTION:

Radio Assembly

Procedure