Circuit/System Verification
IMPORTANT:
- When using this diagnostic, more than one vehicle key is required to ensure proper diagnosis. If more than one key is not available at the time of service, contact the customer and ask if any other keys can be provided for service. If unavailable, a new second key can be created.
- Interference from an RF device located on the keychain may cause this DTC to set. Remove any RF devices from the keychain before proceeding with the diagnostic.
- Perform the 10-Minute Vehicle Key Relearn procedure. Refer to Replacing Keys (North America except Canada) Replacing Keys (Canada) .
- While viewing the scan tool TDM Valid Key parameter, turn ON the ignition with each of the available vehicle keys. The parameter should read Yes with all available keys.
- If not the specified value, replace the appropriate key.