Removal Procedure
- Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Enclave)Rear Side Door Trim Panel Replacement (Acadia or Traverse)
.
- Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement
.
- Remove the energy absorber retainers and energy absorber from the door.
- Remove the covers that conceal the holes for the regulator bolts.
Courtesy of GENERAL MOTORS COMPANY
- Remove the window to regulator bolts. Refer to Rear Side Door Window Replacement .
- Raise and support the window in the full up position.
- Disconnect the electrical connector from the regulator motor.
- Loosen the upper bolt (3) that retain the regulator to the inner door.
- Remove the nut (2).
- Remove the lower regulator bolts (1).
- Lift the regulator/motor upward in order to release the upper bolt (3) from the door.
- Remove the regulator/motor from the door.
- Remove the upper bolt (3) from the regulator (4).
- Remove the window regulator motor (5) and the regulator from the door.