Express Programming After Motor Replacement

Window regulator motor programming must be performed after a window regulator motor has been replaced. When the reprogramming procedure has been completed, the PWR WNDW circuit breaker must be removed for at least 30 seconds.

When a window regulator motor is disconnected from battery voltage, it must be reprogrammed in order for the express-UP or express-DOWN feature to operate properly. Keep in mind, that if something is obstructing the window from opening or closing and you continue programming, the window will only express-UP or express-DOWN to the spot where the obstruction occurred. If an obstruction comes in contact with the window during the programming procedure, the procedure will have to be repeated.