LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Body Wiring Harness Connector & Negative Battery Cable Connector
    GM1860988Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Disconnect the body wiring harness electrical connector (3) from the battery current sensor (2).
  3. Disconnect the body wiring harness electrical connector (4) from the negative battery cable electrical connector (1).
    4. Fig 2: Body Wiring Harness, Electrical Connector & Positive Battery Cable Clips
    GM1861042Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the body wiring harness electrical connector (2) from the positive battery cable electrical connector (3).
    5. Fig 3: Positive Battery Cable Clips & Positive Battery Cable Cover
    GM1861043Courtesy of GENERAL MOTORS COMPANY
  5. Open the positive battery cable cover (2).
  6. Loosen the positive battery cable terminal nut.
  7. Remove the positive battery cable terminal from the battery positive terminal and reposition the cable out of the way.
    8. Fig 4: Battery Vent Hose Grommet
    GM1861108Courtesy of GENERAL MOTORS COMPANY
  8. Remove the battery vent hose grommet (1) from the battery box.
    9. Fig 5: Battery, Battery Hold Down & Bolt
    GM1861109Courtesy of GENERAL MOTORS COMPANY
  9. Remove the battery hold down bolt (2).
  10. Remove the battery hold down (3).
  11. Remove the battery (1).
    12. Fig 6: Battery Vent Hose
    GM1861110Courtesy of GENERAL MOTORS COMPANY
  12. Remove the battery vent hose (1) from the battery, if required.
scientia non olet · About LEMON Manuals