LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection 
  2. Remove the left catalytic convertor. Catalytic Converter Replacement - Left Side
    3. Fig 1: Starter Heat Shield Bolt And Shield
    GM4360592Courtesy of GENERAL MOTORS COMPANY
  3. Remove the starter heat shield bolt (1) and shield (2).
    4. Fig 2: Battery Positive Junction Block Cable Clip & Cable Terminal
    GM1861148Courtesy of GENERAL MOTORS COMPANY
  4. Remove the starter solenoid BAT terminal nut (3).
  5. Remove the battery positive junction block cable terminal (2) from the starter.
    6. Fig 3: Engine Wiring Harness Electrical Connector
    GM1860484Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the engine wiring harness electrical connector (1) from the starter.
  7. Disconnect the engine wiring harness electrical connector (2) from the bank 2 knock sensor (3).
    8. Fig 4: Starter Bolts And Starter
    GM4360625Courtesy of GENERAL MOTORS COMPANY
  8. Remove the starter bolts (1) and starter (2).
scientia non olet · About LEMON Manuals