LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L (LLT) - Repair Instructions >> Repair Instructions >> Knock Sensor Replacement - Bank 2 >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Engine Wiring Harness Electrical Connectort - Bank 2
    GM1860484Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the engine oil filter. Refer to Engine Oil and Oil Filter Replacement .
  3. Remove Catalytic Converter Replacement - Left Side
  4. Lower the vehicle.
  5. Disconnect the engine wiring harness electrical connector (2) from the bank 2 knock sensor (3).
    6. Fig 2: Left Knock Sensort - Bank 2
    GM860802Courtesy of GENERAL MOTORS COMPANY
  6. Loosen the knock sensor bolt and remove the knock sensor.
scientia non olet · About LEMON Manuals