Diagnostic Aids
- If DTC B101D is set as history or current in the K36 Inflatable Restraint Sensing and Diagnostic Module (SDM) and there are Air Bag or Pretensioner DTC's with symptom byte 02, it is important to repair the deployment loop issue first prior to replacing the K36 SDM. Failure to repair the Air Bag or Pretensioner wiring concern first may cause B101D to reset in the replacement K36 SDM.
- This DTC may be stored as a history DTC without affecting the operation of the control module.
- Do not replace a control module based only on DTC B101D being set in history with the exception of the following control modules:
- K36 Inflatable Restraint Sensing and Diagnostic Module (SDM)
- K85 Passenger Presence Detection Module
- If DTC B101D is set as current, replace the appropriate control module.