Circuit/System Verification
- Determine the control module that is not communicating. Refer to Control Module U Code List .
- Verify that DTC U0073, U2100, U0074, U0078, U1814, U2099, B1325, B1330, B1370, B1380, B1424, B1428, B1440, B1441, B1517, C0800, C0899, C12E1, P0560, or P0562 is not set.
- Engine running for 10 seconds.
- Ignition ON, engine OFF, verify that DTC U0100-U02FF is not set with symptom byte 00.
- If the DTC U0100-U02FF is set with symptom byte 00, refer to Circuit/System Testing.
- Verify that DTC U0100-U02FF is not set with symptom byte 71 or 72.
- If the DTC U0100-U02FF is set with symptom byte 71 or 72 along with other DTCs set, diagnose all other codes first. Refer to Diagnostic Trouble Code (DTC) List - Vehicle
.
- If the DTC U0100-U02FF is set with symptom byte 71 or 72 and without other DTCs set, reprogram the control module. If the DTC resets, replace the control module.