LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Front View Camera Module Programming and Setup >> Front View Camera Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front View Camera Module Replacement

If the Front View Camera Module needs to be replaced, the following procedures must be performed:

  1. Connect a scan tool to the vehicle and access Service Programming System (SPS).
  2. Perform the SPS function Front View Camera Module - Programming and follow the on-screen instructions.
  3. Clear DTCs after completing the programming procedure.
    4. NOTE:

    After programming is performed, it is normal to have DTC B1008 4B set until calibration is complete.

  4. Following programming, the module will require calibration. Refer to Front View Camera Module Learn .
scientia non olet · About LEMON Manuals