LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Liftgate Control Module Programming and Setup >> Liftgate Calibration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Liftgate Calibration

NOTE:

To ensure proper calibration of the liftgate, the liftgate assembly must be at room temperature during the calibration process.

NOTE:

DTC B1019 00 will set automatically as an indicator that the system is in learn mode and not as a fault indicator. Once the travel limits are learned by the liftgate module, the liftgate module will exit the learn mode and DTC B1019 00 become a history code.

If any portion of the power liftgate assembly is replaced, repaired or disassembled, perform the following liftgate calibration procedure:

  1. Connect the scan tool to the vehicle.
  2. Select Module Diagnosis:
  3. Select Liftgate Control Module:
  4. Select Configuration/Reset Functions:
  5. Select Liftgate Maximum Open Position Learn:
  6. Press "Enter" and follow the on screen instructions:
scientia non olet · About LEMON Manuals