LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Liftgate Control Module Programming and Setup >> Liftgate Control Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Liftgate Control Module Replacement

If the liftgate control module is replaced, the following procedures must be performed.

  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
  2. Perform the SPS function Liftgate Control Module - Programming and follow the on-screen instructions.
  3. Perform the SPS function Liftgate Control Module - Configuration & Setup and follow the on-screen instructions. On the screen Control Module - Configuration & Setup Function(s), select both ECU Configuration/Reconfiguration and the appropriate ECU Setup.
  4. Clear DTCs after completing the programming procedure.
scientia non olet · About LEMON Manuals