LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Cooler Pipe/Hose Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the right front frontwards wheelhouse liner. Refer to Front Wheelhouse Front Liner Replacement (Acadia, Enclave, Traverse) .
  2. Place drain pans under the vehicle as needed.
    3. Fig 1: Power Steering Fluid Cooler, Power Steering Cooler Pipe & Clamp
    GM1870063Courtesy of GENERAL MOTORS COMPANY
  3. Loosen the power steering cooler pipe clamp (2) and disconnect the power steering cooler pipe (3) from the power steering fluid cooler (1).
    4. Fig 2: Power Steering Gear Outlet Hose Bracket Bolt
    GM1870064Courtesy of GENERAL MOTORS COMPANY
  4. Remove the power steering gear outlet hose bracket bolt (1).
  5. Remove and discard the power steering gear outlet hose clamp (2).
  6. Disconnect the power steering cooler pipe from the power steering gear outlet hose (4, 3).
  7. Remove any plastic retaining clips on the power steering cooler pipe and discard them.
  8. Remove the power steering cooler pipe from the vehicle.
scientia non olet · About LEMON Manuals