LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Fluid Reservoir Outlet Hose Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    NOTE:

    Clip the power steering fluid reservoir hose in place in its original routing.

  1. Install the power steering fluid reservoir outlet hose to the vehicle.
    2. Fig 1: Power Steering Fluid Reservoir Outlet Hose
    GM1856746Courtesy of GENERAL MOTORS COMPANY
  2. Connect the power steering fluid reservoir outlet hose (1) to the power steering pump.
    3. Fig 2: Power Steering Fluid Reservoir Outlet Hose & Clamp
    GM1856009Courtesy of GENERAL MOTORS COMPANY
  3. Connect the power steering fluid reservoir outlet hose (1) to the remote power steering fluid reservoir.
  4. Clean all excess fluid from the vehicle and remove the drain pans.
  5. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .
  6. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
scientia non olet · About LEMON Manuals