Circuit/System Verification
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify that there are no engine controls or communication DTCs set.
- If a DTC is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle for diagnosis of engine control or communications DTCs.
- Go to next step: If a DTC is not set
- If a DTC is set
- Verify that there are no transmission control module DTCs set.
- If a DTC is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle for diagnosis of transmission control module DTCs.
- Go to next step: If a DTC is not set
- If a DTC is set
- Verify that there are no ABS actuator control module DTCs set.
- If a DTC is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle for diagnosis of ABS actuator control module DTCs.
- Go to next step: If a DTC is not set
- If a DTC is set
- Verify that there are no combination meter DTCs set.
- If a DTC is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle for diagnosis of combination meter DTCs.
- Go to next step: If a DTC is not set
- If a DTC is set
- Verify that there are no conditions with the output speed sensor Refer to Diagnostic Trouble Code (DTC) List - Vehicle
for diagnosis of output speed sensor.
- If a condition exists
Repair or replace as necessary.
- Go to next step: If a no condition exists
- If a condition exists
- Verify that there are no conditions with the wheel sensor Refer to Diagnostic Trouble Code (DTC) List - Vehicle
for diagnosis of wheel sensor.
- If a condition exists
Repair or replace as necessary.
- Go to next step: If a no condition exists
- If a condition exists
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: If the DTC does not set
- If the DTC sets
- All OK.