Wheel Alignment Specifications (Wheel Alignment Specifications (Rear))
UNITED STATES and CANADA
NOTE:
Specifications are valid when fuel, engine coolant, and lubricants are full. Spare tire, jack, hand tools, and mats are in designated positions.
| Camber Degree minute (Decimal degree) |
Minimum | - 2° 00' (- 2.00°) |
| Nominal | - 1° 30' (- 1.50°) | |
| Maximum | - 1° 00' (- 1.00°) |
| Total toe-in | Distance (A - B) | Minimum | Out 2.0 mm (Out 0.079 in) |
| Nominal | In 3.0 mm (In 0.118 in) | ||
| Maximum | In 8.0 mm (In 0.315 in) | ||
| Angle (LH and RH) Degree minute (Decimal degree) |
Minimum | Out 0° 14' 12" (Out 0.23°) | |
| Nominal | In 0° 16' (In 0.27°) | ||
| Maximum | In 0° 46' (In 0.77°) |
Wheelarch Height
| Front (A) | 700 mm (27.56 in) |
| Rear (B) | 737 mm (29.02 in) |