Column Lock Module Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure With the vehicle in accessory mode, remove fuse to unlock the steering column lock control module - Steering Wheel Wiring Schematics Steering Column Replacement (N37) , or Steering Column Replacement (N38)
1	Steering Column Lock Control Module Bolt- Rear [2x] CAUTION: Refer to Fastener Caution . Tighten 9.5 N.m (84 lb in)
2	Steering Column Lock Control Module Bolt - Side [2x] Tighten 9.5 N.m (84 lb in)
3	Steering Column Lock Control Module Procedure Program the steering column lock control module. Control Module References