Engine Assembly: Remove, Install, and Overhaul
Includes: Replace Rings, Main and Rod Bearings, Camshaft(s), Crankshaft and Timing Components. Remove Cylinder ridge, burnish Cylinders, grind Valves and clean and test or replace Lifters.
Includes (where applicable): Adjust Valves. DOES NOT include Pin fit or rebore and align Rods. See machine operations.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| 2.5L Eng | DOES NOT include Air Conditioning System recover, evacuate and recharge.
DOES NOT include wheel alignment. | 28.3 | | A |
| Combination Procedure: CRANKSHAFT POSITION SENSOR: Reset: |
| Crankshaft Position Variation Learn | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | | B |
| Combination Procedure: THROTTLE BODY ASSEMBLY: Reset: |
| Throttle Body Idle Air Flow Compensation Reset | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | | B |