Theft Deterrent Module Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Front Floor Console Rear Air Duct Replacement (Accessory AC and DC Power Control Module Cooler Duct)Front Floor Console Rear Air Duct Replacement (With KI6 To Outlet)Front Floor Console Rear Air Duct Replacement (Without KI6 To Outlet)
1	Theft Deterrent Module Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 1 N.m (9 lb in)
2	Theft Deterrent Module Procedure Disconnect the electrical connector. Disengage tabs on coil and slide rearward to remove. Control Module References for programming and setup information, if required.

Callout

Component Name

Theft Deterrent Module Bolt [2x]

CAUTION:

Tighten
1 N.m (9 lb in)

Theft Deterrent Module

Procedure