Circuit/System Verification
- Ignition ON/Vehicle In Service Mode, engine OFF.
- Verify DTC U3000 is not set.
- If DTC U3000 is set with symptom byte 43, 47, or 4B
- Program the device that sets the DTC.
- Verify the DTC does not set.
- If the DTC sets, replace the device that sets the DTC.
- Go to next step: If the DTC does not set
- All OK.
- If DTC U3000 is set with any symptom byte, except 43, 47, or 4B
Replace the device that sets the DTC.
- Go to next step: If DTC U3000 is not set
- All OK