Fuel Injector Control Module Programming and Setup: Notes

The fuel injector control module (FICM) must be programmed with the proper calibration software. The module stores and utilizes this information, however if it is not properly configured with the correct calibration software, the FICM will not control all of the vehicle features properly.

Ensure that the following conditions exist in order to prepare for FICM programming:

1. The battery is fully charged.
2. The MDI data link connectors are secure.
3. The scan tool is loaded with the most current software version.
4. All disconnected modules and devices are reconnected securely.
5. This entire procedure has been reviewed before proceeding.

Do not reprogram the FICM unless directed by a service procedure or a service bulletin.