Circuit/System Verification

Verify that DTC P0D4E or P0D4F is not set; or DTC P0D4D is set along with either DTC P0D4E or P0D4F.
- If DTC P0D4E or P0D4F is set
  Refer to Circuit/System Testing.
- Go to next step: If DTC P0D4D is set without P0D4E, P0D4F; or none of the DTCs are set
Clear DTC Information. Connect the vehicle to an AC drive motor battery charger cable to begin charging. Vehicle in Service Mode.
Verify that DTC P0D26 is not set and that the vehicle will charge.
- If the DTC is set
  Refer to DTC P0D26 .
- Go to next step: If the DTC is not set and that the vehicle will charge
Verify that DTC P0D4D is not set.
- If the DTC is set
  Refer to Circuit/System Testing.
- Go to next step: If the DTC is not set
All OK.