Transmission Assembly: Remove, Install, and Overhaul
Includes: Inspect and replace all necessary components, clean and check Converter, flush Oil Cooler Lines, adjust and road test.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 2.5L Eng,Automatic Trans,RWD | Includes: Programming. Includes: Confirm Fluid temperature for level check. | 14.9 | A | |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| 2.5L Eng, Rear | 0.5 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 2.5L Eng | 0.3 | C | ||