Fastener Specifications
Single Use Non-Threaded Fasteners/Components
| Application |
|---|
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
| Steering Gear Boot Inner Clamp |
SINGLE USE THREADED FASTENER/COMPONENT TIGHTENING SPECIFICATIONS
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
| Steering Gear Bolt | |
|
100 N.m (74 lb ft) |
|
97 Degrees |
REUSABLE THREADED FASTENER TIGHTENING SPECIFICATIONS
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Steering Linkage Inner Tie Rod | 100 N.m (74 lb ft) |
| Steering Linkage Outer Tie Rod Nut | |
|
30 N.m (22 lb ft) |
|
128 Degrees |