Grind Complete
WARNING: This page is about the Blazer LT, 2.0L Eng VIN 4, 4WD, which is a different variant/trim than selected.
Includes: Remove carbon, check surfaces for warpage, reface or replace Valves, resurface Valve Seats and clean Valve Guides. Adjust Valves (where applicable).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 2.0L Eng | 21.0 | A | ||
| Combination Procedure: AIR INTAKE SYSTEM: Reset: | ||||
| Intake System Learned Values Reset | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | B | |
| Combination Procedure: ENGINE OR TRANSMISSION MOUNT: Balance: | ||||
| Powertrain Mount Balancing | 0.5 | D | ||
| Combination Procedure: THROTTLE BODY ASSEMBLY: Reset: | ||||
| Throttle Body Idle Air Flow Compensation Reset | Includes: Additional time for use of scan tool to perform this procedure. | 0.2 | B | |
| Combination Procedure: VALVE LIFTERS (REMOVED): Clean: | ||||
| Each Additional | 0.1 | B | ||
| One | 0.2 | B | ||