Power Line Communication Module Replacement

WARNING: This page is about a different car, the 2020 Chevrolet Bolt EV. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures WARNING: Battery Disconnect Warning Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection Remove the driver seat. Front Seat Removal and Installation
1	Power Line Communication Module Nut CAUTION: Fastener Caution Tighten 9 N.m (80 lb in)
2	Power Line Communication Module Procedure To access the module, open up the floor carpet along the cut line. Disconnect the electrical connectors. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection For programming and set up, refer to Control Module References .

Callout

Component Name

Preliminary Procedures

WARNING:

Battery Disconnect Warning

Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
Remove the driver seat. Front Seat Removal and Installation

Power Line Communication Module Nut

CAUTION:

Fastener Caution

Tighten
9 N.m (80 lb in)

Power Line Communication Module

Procedure

To access the module, open up the floor carpet along the cut line.
Disconnect the electrical connectors.
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
For programming and set up, refer to Control Module References .