LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2021 >> Corvette 2D Convertible >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K71 Transmission Control Module: Programming and Setup (TR-9080 (M1L)) >> Replace and Program Control Module (ECU)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Replace and Program Control Module (ECU)

To program a replacement K71 Transmission Control Module, perform the following procedure:

  1. Ignition/Vehicle - Off
  2. Replace the component: K71 Transmission Control Module
    3. NOTE:

    Begin with the vehicle in vehicle OFF power mode. The Service Programming System will power mode the vehicle.

  3. Access the Service Programming System (SPS) and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen select K71 Transmission Control Module - Replace and Program ECU, and follow the on screen instructions.
  5. Perform the Refresh Characterization Data at the MCVM Characterization procedure. Refer to: Q77 Transmission Control Solenoid Valve Characterization Programming 
  6. Perform the scan tool configuration/reset function: Transmission Service Fast Learn - If available
scientia non olet · About LEMON Manuals