Removal & Installation
WARNING: This page is about the Express 2500 Base, Van Cargo, 2.8L Eng VIN 1, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| In-Line4,8 Spd Trans | 9.9 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| In-Line4,8 Spd Trans | Includes: R&I Fan Shroud Assembly. | 2.9 | C | |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace: | ||||
| 8 Spd Trans | 0.2 | B | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.8 | C | |||