Removal & Installation
WARNING: This page is about the Malibu L, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 1.5L Eng | Includes: R&I Battery and Tray. Includes: Lowering Subframe. Includes: R&I Transmission Assembly. Includes: Confirm Fluid temperature for level check. DOES NOT include wheel alignment. | 10.0 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 1.5L Eng | 0.2 | C | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| 1.5L Eng, Rear | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: OUTPUT SHAFT SEAL: Remove & Replace: | ||||
| Each | 0.2 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 1.5L Eng | 0.1 | C | ||
| Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace: | ||||
| 1.5L Eng | 0.2 | B | ||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| Includes: Programming. | 0.8 | C | ||