Removal & Installation
WARNING: This page is about the Spark ACTIV, Automatic CVT Trans, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Automatic CVT Trans | Includes: Confirm Fluid temperature for level check. DOES NOT include wheel alignment. | 8.5 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| Automatic CVT Trans | 0.2 | C | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Automatic CVT Trans, Rear | 0.5 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| Automatic CVT Trans | 0.3 | C | ||
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: | ||||
| Automatic CVT Trans, Input Shaft,O-Ring | 0.2 | B | ||
| Combination Procedure: OUTPUT SHAFT SEAL: Remove & Replace: | ||||
| Automatic CVT Trans, Each | 0.2 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| Automatic CVT Trans | 0.1 | C | ||
| Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace: | ||||
| Automatic CVT Trans | 0.3 | B | ||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| Automatic CVT Trans | Includes: Programming. | 0.8 | C | |