Removal Procedure

WARNING:

CAUTION:

Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced.

Disable the SIR system. SIR Disabling and Enabling
Courtesy of GENERAL MOTORS COMPANY

Rear Seat Belt Retractor Sleeve (1) - Reposition
Rear Seat Belt Anchor Plate Bolt (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Rear Seat Belt Opening Bezel (1) - Disengage
Courtesy of GENERAL MOTORS COMPANY

Quarter Window Trim Finish Panel Bolt Cap (1) - Remove
Quarter Window Trim Finish Panel Bolt (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.

NOTE:

Feed the rear seat belt opening bezel and rear seat belt through the body lock upper trim panel.

Body Lock Pillar Upper Trim Panel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Observe the mounting a location of the remote function actuator module to ensure proper reinstallation.

Disconnect the electrical connector.
Release the retaining tab.
Remote Function Actuator Module (1) - Remove