Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Electronic Brake Control Module (1) - Install
Fig 1: Electronic Brake Control Module Bolts Tightening Sequence
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

NOTE:
A new EBCM may not have threaded inserts. Refer to the Electronic Parts Catalog and use new self tapping fasteners to form the threads.

Electronic Brake Control Module Bolt (1) - Install and tighten in sequence [ 4x ]
1. First Pass: 1.5 N.m (13 lb in)
2. Second Pass: 2.5 N.m (22 lb in)
3. Final Pass: 3.5 N.m (31 lb in)
Electronic Brake Control Module with Brake Pressure Modulator Valve - Install - Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement
Program the Electronic Brake Control Module. Control Module References
Bleed the brake system. Hydraulic Brake System Bleeding (Manual) , or Hydraulic Brake System Bleeding (Pressure)