Unsuccessful Programming Recovery
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
In the event of an interrupted or unsuccessful configuration and setup event, perform the following steps:
- Verify the control module, data link connector and programming tool connections are secure and the tool software is up to date.
- Initiate Vehicle Sleep Mode
- Ignition/Vehicle - Off
- Close all doors
- Remove Key
- Wait for IPC to time out (up to 2 mins)
- Ignition ON / Vehicle in Service Mode
- Perform the SPS function: Configuration and Setup
- If the configuration or setup is not successful - Replace the component: K85P Restraints Occupant Classification System Module - Passenger
- Go to next step: If the programming is successful
- All OK