Installation Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Install the low frequency body side antenna (1) and secure the 2 retainer tabs.
- Connect the electrical connector.
Position the rocker panel molding (2) to the vehicle and seat the upper rocker panel molding retainers (1) into the body side outer panel.
- Seat the lower rocker panel molding retainers (1) into the body side outer panel.
Position the rear wheelhouse liner (3) to its original location.
- Rear Wheelhouse Liner Retainer (2) Install
- Rear Tire Front Air Deflector Bolt (1) - Install and tighten - Fastener Specifications
Position the front wheelhouse liner (2) to its original location.
- Front Wheelhouse Liner Retainer (1) - Install
- Close both front and rear side doors.
CAUTION:
Refer to Fastener Caution .