Installation Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Connect the electrical connector.
- Remote Function Actuator Module (1) - Install
- Ensure the retaining tabs have engaged and remote function actuator module (1) is fully seated.
- NOTE:
Left side shown, right side similar.
Quarter Upper Trim Panel- Right Side (3) - Install
- Quarter Window Trim Finish Panel Bolt- Right Side (2) - Install and tighten - Fastener Specifications
- Quarter Window Trim Finish Panel Bolt Cap- Right Side - Install
- Fold the rear seat back to the upward position.
- Enable the SIR System. SIR Disabling and Enabling