Removal Procedure
- The steering column
- The intermediate shaft(s)
- The steering gear
- With the steering wheel in the straight ahead position, LOCK the steering column.
Intermediate Steering Shaft Upper Bolt (1) - Remove
- Intermediate Steering Shaft (2) @ Steering Column - Separate
Intermediate Steering Shaft Lower Bolt (1) - Remove
- Intermediate Steering Shaft (2) @ Steering Gear - Separate
Remove the intermediate steering shaft (1) from the vehicle.
With wheels of the vehicle facing straight ahead, secure the steering wheel utilizing steering column anti-rotation pin, steering column lock, or a strap to prevent rotation. Locking of the steering column will prevent damage and a possible malfunction of the SIR system. The steering wheel must be secured in position before disconnecting the following components:
After disconnecting these components, do not rotate the steering wheel or move the front tires and wheels. Failure to follow this procedure may cause the SIR coil assembly to become un-centered and cause possible damage to the SIR coil. If you think the SIR coil has become un-centered, refer to your specific SIR coil's centering procedure to re-center SIR Coil.