LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2021 >> Traverse LS, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Programming And Setup) >> Repair Instructions >> K160 Brake System Control Module: Programming and Setup >> Reprogram Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogram Control Module

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

To program an existing control module, perform the following procedure:

  1. Ignition/Vehicle OFF, ensure that the key fob is inside the vehicle and not moved for the duration of the programming.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions for the K160 Brake System Control Module.
  3. Perform the SPS function: Programming  and follow the on-screen instructions.
  4. Clear DTCs.
scientia non olet · About LEMON Manuals