LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2021 >> Traverse LS, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Programming And Setup) >> Repair Instructions >> K69 Transfer Case Control Module: Programming and Setup >> Programming an Existing or New Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming an Existing or New Control Module

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

To program an existing or new control module, perform the following procedure:

  1. Access SPS and follow the on-screen instructions for the control module:K69 Transfer Case Control Module
  2. Perform the SPS function:K69 Transfer Case Control Module - Programming
  3. Perform the scan tool configuration/reset function:Transfer Case Clutch Identifier
  4. Clear DTCs.
scientia non olet · About LEMON Manuals