Unsuccessful Programming Recovery

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Ensure the EL-52100 is used when programming the vehicle.

In the event of an interrupted or unsuccessful programming event, perform the following steps:

Verify the K9 Body Control Module, X84 Data Link Connector, and programming tool connections are secure and the SPS software is up to date.
Ignition/Vehicle OFF.
Access SPS and follow the on-screen instructions for the K9 Body Control Module.
Verify the K9 Body Control Module can be reprogrammed.
- If the K9 Body Control Modulee cannot be reprogrammed
1. Ignition/Vehicle OFF for greater than 1 min.
2. Access SPS and follow the on-screen instructions for the K9 Body Control Module.
3. Verify the K9 Body Control Module can be reprogrammed.
  - If the K9 Body Control Module cannot be reprogrammed, replace the K9 Body Control Module.
  - Go to next step: If the K9 Body Control Module can be reprogrammed.
4. All OK.
- Go to next step: If the K9 Body Control Module can be reprogrammed
All OK.