Removal Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Open both front and rear side doors.
Front Wheelhouse Liner Retainer (1) - Remove
- Front Wheelhouse Liner (2) - Reposition
- NOTE:
Remove only the outer rear tire front air deflector bolt. The rear tire front air deflector will be repositioned with the rear wheelhouse liner.
Rear Tire Front Air Deflector Bolt (1) - Remove
- Rear Wheelhouse Liner Retainer (2) - Remove
- Rear Wheelhouse Liner (3) - Reposition
Using an appropriate trim tool, release the lower rocker panel molding retainers (1) and pull the rocker panel molding (2) away from the body side outer panel.
- Using an appropriate trim tool, release the upper rocker panel molding retainers (1) and pull the rocker panel molding (2) away from the body side outer panel.
- Rocker Panel Molding (2) - Remove
Release the 2 retainer tabs and remove the low frequency body side antenna (1).
- Disconnect the electrical connector.
Release the retaining tabs on the ignition lock key transmitter antenna bracket (1).