Installation Procedure
Steering Linkage Outer Tie Rod (1) - Install
- CAUTION:
Ensure the Outer Tie Rod Boot is not twisted or deformed during assembly. If the boot is twisted or deformed, damage to the boot will occur.
Steering Linkage Outer Tie Rod (1) @ Steering Knuckle - Install
- CAUTION:
Steering Linkage Outer Tie Rod Nut (1) - Install and tighten
- First Pass: 35 N.m (26 lb ft)
- Final Pass: 90 - 100 degrees
Tighten the steering linkage inner tie rod nut (1) during the front toe adjustment procedure.
- Install the front tire and wheel assembly. Tire and Wheel Removal and Installation
- Measure and adjust the front toe. Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment