Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful programming event, perform the following steps:

1. Ignition ON. Ensure the K182 Parking Assist Control Module, DLC and programming tool connections are secure and the SPS software is up to date.
2. Verify the parking assist control module can be reprogrammed.
   • If the K182 Parking Assist Control Module cannot be reprogrammed 
   1. Ignition OFF for one minute, ignition ON.
   2. Verify the parking assist control module can be reprogrammed.
      • If the K182 Parking Assist Control Module cannot be reprogrammed, replace the parking assist control module.
      • Go to next step: If the K182 Parking Assist Control Module can be reprogrammed.
   3. All OK.
   • Go to next step: If the K182 Parking Assist Control Module can be reprogrammed 
3. All OK.