Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful setup event, perform the following steps:

1. Ignition / Vehicle OFF.
2. Ensure the Image Processing Module, DLC and programming tool connections are secure and the SPS software is up to date.
3. Ignition / Vehicle OFF, all access doors closed, all vehicle systems OFF for two minutes.
   • Attempt to reprogram the K124 Image Processing Module 
   1. Verify the K124 Image Processing Module can be reprogrammed.
      • If the image processing module cannot be reprogrammed, contact Techline Customer Support Center (TCSC).
      • Go to next step: If the K124 Image Processing Module can be reprogrammed.
   2. All OK.