Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful programming event, perform the following steps:

NOTE:

Begin with the vehicle in the vehicle OFF power mode. The Service Programming System will power mode the vehicle.

Ignition / Vehicle OFF
Ensure the control module, DLC and programming tool connections are secure and the SPS software is up to date.
Verify the control module can be reprogrammed.
- If the control module cannot be reprogrammed
Ignition OFF for one minute.
1. Verify the control module can be reprogrammed.
  - If the control module cannot be reprogrammed
  - Replace the control module.
  - Go to next step: If the control module can be reprogrammed
2. Clear DTCs.
3. All OK.