LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2024 >> Traverse Limited LS, 4WD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K39 Liftgate Control Module: Programming and Setup (With 09F) >> Reprogram Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogram Control Module

NOTE:

Vehicles equipped with RPO 09F (NOT EQUIPPED WITH LIFTGATE, POWER, HANDS FREE) have RPO TC2 but should be programmed as a normal non-handsfree power liftgate.

NOTE:

The liftgate must be completely closed and latched, if the liftgate is open or ajar during programming, the power liftgate system may become inoperative without any DTCs indicated

To reprogram an existing control module, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K39 Liftgate Control Module - Programming and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K39 Liftgate Control Module - Setup and follow the on-screen instructions.
  4. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
  5. With a scan tool, perform the Liftgate Relearn Refer to Liftgate Calibration
scientia non olet · About LEMON Manuals